Here is our list of Top 3 Best Aftermarket Exhausts for Honda CB300R
Aftermarket Exhausts: One of the most loved accessories that every rider used to install or fit according to their needs like sound, looks, and performance which comes with some of the pros and cons factors in it.
So, Riders here is the list of advantages of upgrading your company fitted to a high-performance aftermarket exhaust.
These Top 3 Best Aftermarket Exhausts for your Honda CB300R is purely based on Sound, Built Quality, Style, Looks, and Performance.
Benefits of upgrading your company fitted to High-Performance aftermarket exhausts
- Insane boost in performance.
- Premium looks and design.
- Pure refined exhaust sound note.
- More bass and hard thumping noise.
- Adds more horsepower(hp) and torque.
- Ability to adjust the sound note by inserting a DB killer that comes with the exhaust.
- Makes the motorbike much lighter and feels premium in the hands.
- Performs lots better in terms of performance, sound, and mileage.
- And finally, people notice you.
Benefits of not upgrading your company fitted/Stock exhausts:
- Sometimes the engine runs hot of the bike in some cases(very rare).
- A bit affects in mileage of the bike.
- Less noise pollution.
Yoshimura R-77 Full System FS SS-CF-CF WORKS FINISH(12310AJ220)
Yoshimura, a company started by Hideo Pops in 1954 with Yoshimura’s innovative team, the art of building techniques, relentless work ethic, High-end lightweight materials, and NextGen Yoshimura R&D work station leads to winning many championships.
Design: Signature Tri-Oval legacy design featuring a touch of a trendy satin matte finish which will look great on your Honda CB300R.
Built quality: Highly engineered with performance Stainless steel and Carbon fiber.
Sound note: A pure Japanese magic tone of very smoothy deep thumping throaty sound.
Performance: Performance of the engine level’s up to 4.2% in peak hp and 3.0% peak torque.
The weight: The weight of the Yoshimura R-77 full system is approx 3.5 k.g or 7.8 Lbs.
Features
- Adds a unique coloring after it goes through a heat cycle in your Honda CB300R that looks much like those titanium work.
- Trendy satin-matte finish work done.
- Uniform heat coloration.
- Boost in fatigue strength.
- Improve scratch and stain resistance.
- The USA made products.
- Light-weighted.
Pros
- Gets an insane boost in performance.
- Yoshimura R-77 exhaust systems carry a one-year warranty against defects in workmanship or materials.
- Factory maintenance & crash repair services are available for the Yoshimura R-77 Exhaust Systems.
- No fuel remapping is required.
Cons
- a bit expensive.
Comes with: The exhaust comes with Yoshimura header, Yoshimura tailpipe, Carbon fiber muffler, Stainless steel muffler, muffler clamp, Muffler clamp heat insulator, Exhaust clamp, 2-Medium exhaust spring, O2 Bung adapter, Spring puller tool, Sticker kit sheet.
Fittings: Yoshimura R-77 Full System fits perfectly on your Honda CB300R without any doubt and problem.
Price: Yoshimura R-77 Full System will cost you $689.00.
Buy: You will be able to buy this product from www.yoshimura-rd.com
Akrapovic Slip-On Line (Carbon)S-H3SO7-APC
Akrapovic, a company known for its design, superbly built technology, insane performance, and deeply resonant sound.
Design: A very well designed and crafted with carbon-fiber muffler outer sleeve and end cap with race-rated materials.
Built quality: Made of carbon fiber, performance stainless steel, and race-proven materials.
Sound note: Unique deep resonant Akrapovic sound with intimating bass and a sportier sound.
Performance: Performance of the engine level’s up to + 1.341 HP at 4200 rpm and + +2.1 Nm at 4100 rpm.
The weight: The weight of the Akrapovic Slip-On Exhaust Full System is approx 1.8 k.g or 4.0 lb.
Features
- Comes with high-performance carbon fiber, silicon-shielded stainless steel exhaust springs, and race-proven materials.
- A very lightweight, compact, and high-temperature-resistant carbon-fiber muffler clamp.
- Fully optimized exhaust for best performance, output.
- No fuel remapping is required.
Pros
- Incredible built quality and insane performance.
- The exhaust comes with a DB killer (insert SS).
- Compact and Light-weighted as compared to stock ones.
Cons
- not a full system exhaust(Slip-On Exhaust).
Comes with: The exhaust comes with the slip-on system, muffler, heat shield CA, muffler clamp, end cap CA, sticker, 2-titanium tape, insert SS, bolt, washer SS, clamp SS, clamp SS, spring, bolt, 2-washer SS, nut, 4-heat resistant washer, 2-bolt, muffler repack kit and muffler sleeve kit.
Fittings: Akrapovic Slip-On Exhaust fits perfectly on your Honda CB300R without any doubt and problem.
Price: Akrapovic Slip-On will cost you $ 600-706.
Buy: You will be able to buy this product from www.revzilla.com or nearby local bikers Akrapovic Distributor.
Also, Read Top 5 Best Aftermarket Exhausts for Harley Davidson street rod 750 and street 750
Arrow X-Kone Slip-On 71883XKI-71695MI
Arrow it’s all started in the ’90s creating history in the motorcycling industry to reach the standards of the exhaust market. the company had worked intensively so hard to find a level of the product quality, performance, and reliability of Arrow products.
Design: A unique simple stylish design with shiny nickel and stainless steel built body kit that doesn’t compromise on quality and performance.
Built quality: The exhausts are made from a special blend of nickel and stainless steel called NiChrome which shows high heat and corrosion-resistant properties and Carbon fiber end cap.
Sound note: Arrow X-Kone Slip-On exhausts sound deep growl with almost like a dirt bike feels to it.
Performance: Yes, the Performance of the engine level’s up to some extent.
The weight: Arrow X-Kone Slip-On is 30%-40% lighter than stock exhaust ones.
Features
- Carbon fiber end cap.
- It eliminates the catalytic converter.
- MotoGP, Moto2, Moto3 technology has been used in the manufacturing of exhausts.
Pros
- Quality, performance, trust, and reliability.
- Less weight as compared to the stock.
- Excellent fit and finish with an easy installation process.
Cons
- not a full system exhaust(Slip-On Exhaust).
Comes with: X-Kone Carbon End Cap, Race-tech carbon end cap, Race-tech steel end cap, and GP2 silencer.
Fittings: Arrow X-Kone Slip-On fits perfectly on your Honda CB300R without any doubt and problem.
Price: Arrow X-Kone Slip-On will cost you $ 607-610.
Buy: You will be able to buy this product from www.revzilla.com or nearby a local biking store.
Also, Read Top 5 Best Tyres for Suzuki Hayabusa, Price, Reviews
