A complete detailed review for Bajaj Platina 100 Service Schedule, Service Cost, Spare Parts Pricelist
Bajaj India: As we speak about Bajaj India, Basically the company has more than 1015 Bajaj authorized showrooms along with well-equipped authorized service centers across 31 states and 571 cities in India as of Jan 2021.
So as far as our team concern, there will be no problem doing servicing your Bajaj Platina 100 at any of your nearest Bajaj Service Centres at any given time according to your planned schedule.
Services and Spares of Bajaj India: In terms of services and spares, Bajaj workshops are highly equipped with modern service machinery and equipment that come with skilled technicians, proper washing units, and useful service ramps.
And without a doubt, Bajaj service centers have a wide range of spares available in stock for your Bajaj Platina at a very good price point including taxes and charges.
Important note about free servicing of Bajaj Platina 100: Bajaj India company offers 3 – free services for your Bajaj Platina 100 that includes free labor charges, checkup, washing & polishing and you will be charged for consumables like engine oil, spark plug, fuel filter, and more if required.
Things you have to do before Servicing your Bajaj Platina 100
- Always need to service your Bajaj Platina 100 from an authorized Bajaj workshop.
- Make a proper note of the problems you are facing, while riding your Bajaj Platina 100.
- Read your Bajaj Platina 100 trip meter before going for servicing to know to extract the distance you have ridden.
- Always need to carry your Bajaj Platina 100 service manual book and RC (registration certificate) before going to your nearest Bajaj service center.
- Check, research, and compare the price, quality, and brand of engine oil, fuel filter, or any other accessories if you need to fit or install for your Bajaj Platina 100.
- Most Importantly: ask your service technician person to change engine oil, fuel filter, air filter, or any other spares or accessories to install or fit, in your presence there in the Bajaj workshop.
Periodic Service Schedule of Bajaj Platina 100
please note: Bajaj Platina 100 service needs to be performed on km or days from the date of purchase, whichever comes earlier.
- 1st free service is to be performed under 500 – 750 km or 30 – 45 days from the date of purchase.
- 2nd free service is to be performed under 4500 – 5000 km or 240 days from the previous service date.
- 3rd free service is to be performed under 9500 – 10000 km or 360 days from the previous service date.
- 4th paid service is to be performed under 14500 – 15000 km or 480 days from the previous service date.
- 5th paid service is to be performed under 19500 – 20000 km or 600 days from the previous service date.
- 6th paid service is to be performed under 24500 – 25000 km or 720 days from the previous service date.
- 7th paid service is to be performed under 29500 – 30000 km or 840 days from the previous service date.
- 8th paid service is to be performed under 34500 – 35000 km or 960 days from the previous service date.
- 9th paid service is to be performed under 39500 – 40000 km or 1080 days from the previous service date.
- 10th paid service is to be performed under 44500 – 45000 km or 1200 days from the previous service date.
- 11th paid service is to be performed under 49500 – 50000 km or 1320 days from the previous service date.
- 12th paid service is to be performed under 54500 – 55000 km or 1440 days from the previous service date.
Things service mechanic should “Check, Clean, Adjust, Lubricate or Replace if necessary” while servicing your Bajaj Platina 100
For 1st servicing
Starting from Washing with water
- Check
Fuel pipes for cracks, Fault code, Fault history, and Update latest hex file if applicable.
- Clean
Oil strainer, Air cleaner element, air filter cover ‘O’ ring, and Drain tube cleaning.
- Lubricate
General lubrication like a clutch lever, front brake lever, and kick lever.
- Replace
Engine Oil and Engine Oil Filter.
- Check and Adjust
Valve tappet clearance, Steering play, All cables free play adjustment, Headlight focus adjustment and confirm all bulbs, All switches working, tire air pressure, mirror position, and joint firmness.
- Check and Tighten
Rear sprocket fasteners for looseness, All fasteners tightness like front & rear axle, swing arm axle, engine foundation, rider footrest, and pillion stay.
- Check and Replace
EVAP system Hoses-check for cracks. Front fork oil & seal, Brake shoe(front/rear), and brake pad(Front) for wear limit. (Drum brake).
- Check, Adjust and Tighten
Wiring harness connection, routine & conduit/PVC sleeve inspection.
- Check, Adjust and Replace
Source of leakage if any in the braking system, front brake hose condition, brake fluid level and top up, if needed.
- Check, Adjust, Lubricate and Tighten
Battery, connections & health by load tester and +ve terminal cap fitment.
- Clean, Lubricate & Adjust and Replace if required
Non- Sealed Drive chain Wear.
For 2nd servicing
Starting from Washing with water
- Top-up
Engine Oil.
- Check
Fuel pipes for cracks, Fault code, Fault history, and Update latest hex file if applicable.
- Clean
Air cleaner element, air filter cover ‘O’ ring, and Drain tube cleaning.
- Lubricate
General lubrication like a clutch lever, front brake lever, and kick lever.
- Clean and Lubricate
Brake Cam front/rear (Drum brake).
- Check and Adjust
Valve tappet clearance, Steering play, All cables free play adjustment, Headlight focus adjustment and confirm all bulbs, All switches working, Tire air pressure, mirror position, and joint firmness.
- Check and Tighten
HT coil connection (primary and secondary), Starter motor & starter relay connections, All fasteners tightness like front & rear axle, swing arm axle, engine foundation, rider footrest, and pillion stay.
- Check and Replace
EVAP system Hoses-check for cracks. Front fork oil & seal, Brake shoe(front/rear), and brake pad(Front) for wear limit. (Drum brake).
- Check, Adjust and Replace
Source of leakage if any in the braking system, front brake hose condition, brake fluid level and top up, if needed.
- Check, Adjust, Lubricate and Tighten
Battery, connections & health by load tester and +ve terminal cap fitment.
- Clean, Lubricate & Adjust and Replace if required
Non- Sealed Drive chain Wear.
For 3rd servicing
Starting from Washing with water
- Check
Fuel pipes for cracks, Fault code, Fault history, and Update latest hex file if applicable.
- Clean
Oil strainer, Air cleaner element, air filter cover ‘O’ ring, and Drain tube cleaning, Silencer Drain hole cleaning.
- Lubricate
General lubrication like a clutch lever, front brake lever, and kick lever.
- Replace
Engine Oil and Engine Oil Filter.
- Clean and Lubricate
Ignition switch contacts cleaning, Brake Cam front/rear(Drum brake).
- Check and Adjust
Valve tappet clearance, Steering play, All cables free play adjustment, Headlight focus adjustment and confirm all bulbs, All switches working, tire air pressure, mirror position, and joint firmness.
- Check and Tighten
HT coil connection (primary and secondary), Starter motor & starter relay connections, All fasteners tightness like front & rear axle, swing arm axle, engine foundation, rider footrest, and pillion stay.
- Clean and Adjust
Spark Plug Clean and Check Gap.
- Check and Replace
EVAP system Hoses-check for cracks. Front fork oil & seal, Brake shoe(front/rear), and brake pad(Front) for wear limit. (Drum brake), Engine breather tube for cracks, Engine foundation silent bushes for cracks, Rear wheel rubber shock dampers for excess play, and Fairing and windshield well nuts for rubber cracks.
- Check, Adjust and Tighten
Wiring harness connection, routine & conduit/PVC sleeve inspection.
- Check, Adjust and Replace
Source of leakage if any in the braking system, front brake hose condition, brake fluid level and top up, if needed.
- Check, Clean, and Lubricate
Steering stem bearing and Cap steering bearing(plastic).
- Check, Adjust, Lubricate and Tighten
Battery, connections & health by load tester and +ve terminal cap fitment.
- Clean, Lubricate & Adjust and Replace if required
Non- Sealed Drive chain Wear.
For 4th servicing
Starting from Washing with water
- Top-up
Engine Oil.
- Check
Check for fault code, clear fault history, update the latest hex file if applicable.
- Clean
Fuel cock sediment bowl cleaning, Carburettor float chamber cleaning, and Silencer drain hole cleaning.
- Lubricate
General lubrication like clutch lever/front brake lever and kick lever.
- Replace
Air Cleaner element & air filter cover O ring and Drain tube cleaning, Fuel pipes for cracks, Brake shoes(front & rear), and brake pad(front) for wear limit(drum brake).
- Clean and Lubricate
Ignition switch contacts cleaning, Brake cam front/rear(drum brake).
- Check and Adjust
Valve tappet clearance, Steering play, All cables free play adjustment, Headlight focus adjustment, Check and confirm all bulbs/switch working, tire air pressure, Mirror position, and joint firmness.
- Check and Tighten
HT coil connections(primary & secondary), Starter motor and starter relay connections, All fasteners tightness like front & rear axle, swing arm axle, Engine foundation, Rider footrest, and Pillion stay.
- Check and Replace
Carburetor rubber duct(sleeve) for hard resulting in loose fitment, Engine breather tube for cracks, EVAP system hoses-check for cracks, Front fork oil, and seal, Fairing & windshield well nuts for rubber cracks.
- Check, Adjust and Tighten
Wiring harness connection, routine & conduit/PVC sleeve inspection.
- Check, Adjust and Replace
Source of leakage if any in the braking system, front brake hose condition, brake fluid level and top up, if needed.
- Check, Adjust, Lubricate and Tighten
Battery, connections & health by load tester and +ve terminal cap fitment.
- Clean, Lubricate & Adjust and Replace if required
Non- Sealed Drive chain Wear.
For 5th servicing
Starting from Washing with water
- Check
Fuel pipes for cracks, Fault code, Fault history, and Update latest hex file if applicable.
- Clean
Oil strainer, Air cleaner element, air filter cover ‘O’ ring, and Drain tube cleaning, Silencer Drain hole cleaning.
- Lubricate
General lubrication like a clutch lever, front brake lever, and kick lever.
- Replace
Engine Oil and Engine Oil Filter, Drive Chain Link Lock.
- Clean and Lubricate
Ignition switch contacts cleaning, Brake Cam front/rear(Drum brake).
- Check and Adjust
Valve tappet clearance, Steering play, All cables free play adjustment, Headlight focus adjustment and confirm all bulbs, All switches working, tire air pressure, mirror position, and joint firmness.
- Check and Tighten
HT coil connection (primary and secondary), Starter motor & starter relay connections, All fasteners tightness like front & rear axle, swing arm axle, engine foundation, rider footrest, and pillion stay.
- Clean and Adjust
Spark Plug Clean and Check Gap.
- Check and Replace
EVAP system Hoses-check for cracks. Front fork oil & seal, Brake shoe(front/rear), and brake pad(Front) for wear limit. (Drum brake), Engine breather tube for cracks, Engine foundation silent bushes for cracks, Rear wheel rubber shock dampers for excess play, and Fairing and windshield well nuts for rubber cracks, Carburettor rubber duct (sleeve) for hard resulting in loose fitment.
- Check, Adjust and Tighten
Wiring harness connection, routine & conduit/PVC sleeve inspection.
- Check, Adjust and Replace
Source of leakage if any in the braking system, front brake hose condition, brake fluid level and top up, if needed.
- Check, Clean, and Lubricate
Steering stem bearing and Cap steering bearing(plastic).
- Check, Adjust, Lubricate and Tighten
Battery, connections & health by load tester and +ve terminal cap fitment.
- Clean, Lubricate & Adjust and Replace if required
Non- Sealed Drive chain Wear.
For 6th servicing
Starting from Washing with water
- Top-up
Engine Oil.
- Check
Fuel pipes for cracks, Fault code, Fault history, and Update latest hex file if applicable.
- Clean
Air cleaner element, air filter cover ‘O’ ring, and Drain tube cleaning, Silencer foundation silent bushes for cracks.
- Lubricate
General lubrication like a clutch lever, front brake lever, and kick lever.
- Clean and Lubricate
Brake Cam front/rear (Drum brake), Ignition switch contacts cleaning.
- Check and Adjust
Valve tappet clearance, Steering play, All cables free play adjustment, Headlight focus adjustment and confirm all bulbs, All switches working, Tire air pressure, mirror position, and joint firmness.
- Check and Tighten
HT coil connection (primary and secondary), Starter motor & starter relay connections, All fasteners tightness like front & rear axle, swing arm axle, engine foundation, rider footrest, and pillion stay.
- Check and Replace
EVAP system Hoses-check for cracks. Front fork oil & seal, Brake shoe(front/rear), and brake pad(Front) for wear limit. (Drum brake), Carburetor rubber duct(sleeve) for hard resulting in the loose filament, Engine breather tube for cracks, Fairing, and windshield well nuts for rubber cracks.
- Check, Adjust and Replace
Source of leakage if any in the braking system, front brake hose condition, brake fluid level and top up, if needed.
- Check, Adjust, Lubricate and Tighten
Battery, connections & health by load tester and +ve terminal cap fitment.
- Clean, Lubricate & Adjust and Replace if required
Non- Sealed Drive chain Wear.
Service Schedule and Service Cost of Bajaj Platina 100
| Service no. | Kilometer & Time Period | Things you need to Change/Check | Cost |
|---|---|---|---|
| 1st free | 750 km or 45 days | Replace Engine Oil and Engine Oil Filter. | ₹ 400 - 500 |
| 2nd free | 750 km or 45 days | Top up Engine Oil. | ₹ 100 - 200 |
| 3rd free | 10000 km or 360 days | Replace Engine Oil and Engine Oil Filter. | ₹ 400 - 500 |
| 4th paid | 15000 km or 480 days | Top up Engine Oil and Labor Charges is needed. | ₹ 600 - 800 |
| 5th paid | 20000 km or 600 days | Replace Engine Oil and Engine Oil Filter and Labor Charges is needed | ₹ 800 - 1200 |
Some of the basic spare parts price list of Bajaj Platina 100
note: At some places, cities, or states, the spare parts price may vary a bit according to its taxes and duties imposed.
| Basic spare parts price list of Bajaj Platina 100 | Price in INR |
|---|---|
| Engine Oil | ₹ 390 |
| Oil Filter | ₹ 45 |
| Air Filter | ₹ 80 |
| Clutch Plate | ₹ 280 |
| Spark Plug | ₹ 84 |
| Timing Chain | ₹ 160 |
| Brake Shoe | ₹ 130 |
| Handle Bar | ₹ 320 |
| Kick Lever | ₹ 240 |
| Chain Sprocket | ₹ 800 - 1000 |
| Battery | ₹ 2400 - 2800 |
Things to do after servicing your Bajaj Platina 100
- Tyre air pressure needs to be Check and Adjust in every servicing you do.
- Mirror position & joint firmness needs to be Check and Adjust in every servicing you do.
- Most importantly Check- clutch, brakes, engine oil level, and electrical like a high beam, low beam, and backlight before leaving the service center.
- Take a short ride with your Bajaj Platina 100 service mechanic and point out the problems, if it was not fixed in the servicing.
- Check your service bill carefully and ask them to show everything in detail what they have installed or replaced in your Bajaj Platina 100.
- Don’t rev the engine in standstill conditions.
- Do not keep the cleaning cloths in the vicinity of a high-temperature zone for e.g engine, silencer assembly, catalytic convertor, starter motor, etc.
Maintenance Cost of in days>months>years
note: No, fuel cost is included in the Maintenance Charges Bajaj Platina 100.
- Maintenance charges of Bajaj Platina 100 in days is rupees 1000 – 1400 for 360 days
which includes 3-free servicing, chain lubricant, cleaning, adjusting, bike washing, cleaning, polishing, tire pressure fill, and sometimes parking frees.
- Maintenance charges of Bajaj Platina 100 in months is 2800 – 3400 rupees for 32 months
which includes monthly paid servicing, chain cleaning, chain slack, lubricant, punctures, rear tire change(depends on your riding style) foam washing, polishing, tire polish, tire pressure check and fill and parking frees.
- Maintenance charges of Bajaj Platina 100 in years is 5500 – 7500 rupees for 3 years
which includes monthly paid servicing, washing, polishing, change in both the tires (rear and front), chain cleaning, battery-change, chain slack, adjusting, chain lubricant, oiling, greasing, change in clutch cables, punctures, handle racer adjust and more.
Questions asked by Bajaj Platina 100 Riders
#) Is it necessary to service Bajaj Platina 100 according to the schedule and date made by the company?
Yes, it is very necessary to service your Bajaj Platina 100 according to your service manual made by the company because by doing it, it becomes easy to claim your bike’s engine warranty if it shows any problems in the future.
#) What’s the Warranty Period of Bajaj Platina 100?
Yours Bajaj Platina 100 comes with a warranty of 5 years or 75,000 km whichever occurs first from the date of sales.
#) What is the tire air pressure for Bajaj Platina 100?
Always maintain recommended tire pressure for Front tire- 25 PSI, Rear tire (Solo)- 28 PSI, and Rear(with Pillion)- 32 PSI.
Best Performance Spares for Motorbike
[table id=138 /
Also, Read Bajaj CT 100 Service Schedule, Service Cost, Spare Parts Pricelist
